Close Go back Collapse all sections
Process Data set: Non-thick oil ; Low permeability oil field 80%~90% ; Secondary oil recovery + tertiary oil recovery ; All sizes; NESPS2 (en) en zh

Key Data Set Information
Location CN
Reference year 2019
Name
Non-thick oil ; Low permeability oil field 80%~90% ; Secondary oil recovery + tertiary oil recovery ; All sizes; NESPS2
Use advice for data set This dataset is derived from the Pollution Source Census Report and contains information on pollution emissions and related products. However, it does not include data on energy or chemical consumption, nor does it provide information on waste or co-product generation. When utilizing this dataset, please supplement the missing data based on actual conditions before use
Technical purpose of product or process 该数据集描述了石油提取行业中用于处理化学需氧量、氨氮、有机态氮和苯酚以及与石油相关废物的各种尾端处理技术。这些技术实施于低渗透非稠油油田的二次和三次采油过程，并适用于所有规模的作业。治理方法包括设计用于启动二次和三次油田回采的物理、化学和生物处理流程以及注入技术。具体描述的技术有过滤分离、浮选分离、生物接触氧化、化学混凝、A2/O工艺、SBR工艺、A/O工艺、倾斜板油水分离器、气浮法、水力旋流器以及各种过滤系统。每项技术的技术效率都有提供，表示预期的污染物减少水平。
Classification
Class name : Hierarchy level
  • ILCD: Reference Parameters / Energy carriers and technologies / Crude oil based fuels
General comment on data set the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisFilter separation/floating separation + bio-contact oxidation process，Its Technical efficiency of end-of-pipe management39
Copyright No
Owner of data set
Quantitative reference
Reference flow(s)
Technological representativeness
Technology description including background system the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisFilter separation/floating separation + bio-contact oxidation process，Its Technical efficiency of end-of-pipe management39
LCI method and allocation
Type of data set Unit process, single operation
Data sources, treatment and representativeness
Deviation from data treatment and extrapolations principles / explanations None
Data source(s) used for this data set
Completeness
Completeness of product model No statement
Validation
Type of review
Dependent internal review
Reviewer name and institution
Data generator
Data set generator / modeller
Publication and ownership
UUID 6ec76f84-24b2-4a24-8481-2d95682171a1
Date of last revision 2024-04-15T22:06:36.543420+08:00
Data set version 00.01.005
Permanent data set URI https://lcadata.tiangong.world/showProcess.xhtml?uuid=6ec76f84-24b2-4a24-8481-2d95682171a1&version=01.00.000&stock=TianGong
Owner of data set
Copyright No
License type Free of charge for all users and uses

Inputs

Outputs

Type of flow Classification Flow Location Mean amount Resulting amount Minimum amount Maximum amount
Product flow
Energy carriers and technologies / Crude oil based fuels 1000.0 kg1000.0 kg
General comment nan
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisFilter separation/floating separation + A/O process，Its Technical efficiency of end-of-pipe management80，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 7.27A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 7.27A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisFilter separation/floating separation + A2/O process，Its Technical efficiency of end-of-pipe management81，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 7.27A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 7.27A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisFilter separation/floating separation + chemical coagulation，Its Technical efficiency of end-of-pipe management78.The original article describes the pollution production coefficients as 7.27A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 7.27A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisFilter separation/floating separation + SBR，Its Technical efficiency of end-of-pipe management92，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 7.27A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 7.27A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisPhysical + chemical + reinjection，Its Technical efficiency of end-of-pipe management100.The original article describes the pollution production coefficients as 7.27A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 7.27A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisPhysical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 7.27A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 7.27A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisFilter separation/floating separation + A/O process，Its Technical efficiency of end-of-pipe management82，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 765A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 765A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisFilter separation/floating separation + A2/O process，Its Technical efficiency of end-of-pipe management85，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 765A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 765A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisFilter separation/floating separation + bio-contact oxidation process，Its Technical efficiency of end-of-pipe management88.The original article describes the pollution production coefficients as 765A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 765A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisFilter separation/floating separation + chemical coagulation，Its Technical efficiency of end-of-pipe management73，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 765A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 765A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisFilter separation/floating separation + SBR，Its Technical efficiency of end-of-pipe management86，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 765A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 765A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisPhysical + chemical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 765A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 765A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisPhysical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 765A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 765A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisFilter separation/floating separation + A/O process，Its Technical efficiency of end-of-pipe management80，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 13.15A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 13.15A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisFilter separation/floating separation + A2/O process，Its Technical efficiency of end-of-pipe management80.The original article describes the pollution production coefficients as 13.15A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 13.15A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisFilter separation/floating separation + bio-contact oxidation process，Its Technical efficiency of end-of-pipe management49，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 13.15A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 13.15A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisFilter separation/floating separation + chemical coagulation，Its Technical efficiency of end-of-pipe management76，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 13.15A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 13.15A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisFilter separation/floating separation + SBR，Its Technical efficiency of end-of-pipe management91，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 13.15A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 13.15A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisPhysical + chemical + reinjection，Its Technical efficiency of end-of-pipe management100.The original article describes the pollution production coefficients as 13.15A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 13.15A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisPhysical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 13.15A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 13.15A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisBuffer tank + hydrocyclone + discharge，Its Technical efficiency of end-of-pipe management41，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 71.07A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 71.07A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisFilter + dual media filter + reinjection，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 71.07A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 71.07A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisFilter separation/floating separation + A/O process，Its Technical efficiency of end-of-pipe management74，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 71.07A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 71.07A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisFilter separation/floating separation + A2/O process，Its Technical efficiency of end-of-pipe management74，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 71.07A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 71.07A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisFilter separation/floating separation + bio-contact oxidation process，Its Technical efficiency of end-of-pipe management92.The original article describes the pollution production coefficients as 71.07A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 71.07A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisFilter separation/floating separation + chemical coagulation，Its Technical efficiency of end-of-pipe management74，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 71.07A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 71.07A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisFilter separation/floating separation + SBR，Its Technical efficiency of end-of-pipe management74，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 71.07A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 71.07A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisHydrocyclone + degassing and oil removal tank + discharge，Its Technical efficiency of end-of-pipe management41，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 71.07A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 71.07A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisHydrocyclone + filter + discharge，Its Technical efficiency of end-of-pipe management74.The original article describes the pollution production coefficients as 71.07A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 71.07A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisInclined plate oil separator + traditional gas flotation machine + walnut shell filter，Its Technical efficiency of end-of-pipe management100.The original article describes the pollution production coefficients as 71.07A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 71.07A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisPhysical + chemical + reinjection，Its Technical efficiency of end-of-pipe management100.The original article describes the pollution production coefficients as 71.07A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 71.07A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisPhysical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 71.07A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 71.07A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisFilter separation/floating separation + A/O process，Its Technical efficiency of end-of-pipe management73，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.82A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.82A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisFilter separation/floating separation + A2/O process，Its Technical efficiency of end-of-pipe management73，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.82A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.82A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisFilter separation/floating separation + bio-contact oxidation process，Its Technical efficiency of end-of-pipe management48，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.82A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.82A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisFilter separation/floating separation + chemical coagulation，Its Technical efficiency of end-of-pipe management45，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.82A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.82A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisFilter separation/floating separation + SBR，Its Technical efficiency of end-of-pipe management73，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.82A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.82A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisPhysical + chemical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.82A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.82A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisPhysical + reinjection，Its Technical efficiency of end-of-pipe management100.The original article describes the pollution production coefficients as 0.82A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.82A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the treatment technology for the pollution of Waste waterdidn't offered，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment .The original article describes the pollution production coefficients as 7.27A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 7.27A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.