Close Go back Collapse all sections
Process Data set: Non-thick oil ; Low-permeability oil fields less than 80% ; Secondary oil recovery + tertiary oil recovery ; All sizes; NESPS2 (en) en zh

Key Data Set Information
Location CN
Reference year 2019
Name
Non-thick oil ; Low-permeability oil fields less than 80% ; Secondary oil recovery + tertiary oil recovery ; All sizes; NESPS2
Use advice for data set This dataset is derived from the Pollution Source Census Report and contains information on pollution emissions and related products. However, it does not include data on energy or chemical consumption, nor does it provide information on waste or co-product generation. When utilizing this dataset, please supplement the missing data based on actual conditions before use
Technical purpose of product or process 所述技术用于工业环境中管道末端管理，处理如化学需氧量、氨氮、与石油相关的废物、有机氮和酚类等污染物。这些技术适用于在非稠油、低渗透油田的二次采油和三次采油过程中处理废水流。该技术组合包括物理、化学和生物处理方法以及回注技术，这对于石油天然气行业实现法规合规和最小化环境影响至关重要。
Classification
Class name : Hierarchy level
  • ILCD: Reference Parameters / Energy carriers and technologies / Crude oil based fuels
General comment on data set the treatment technology for the pollution of Waste waterdidn't offered，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year))
Copyright No
Owner of data set
Quantitative reference
Reference flow(s)
Technological representativeness
Technology description including background system the treatment technology for the pollution of Waste waterdidn't offered，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year))
LCI method and allocation
Type of data set Unit process, single operation
Data sources, treatment and representativeness
Deviation from data treatment and extrapolations principles / explanations None
Data source(s) used for this data set
Completeness
Completeness of product model No statement
Validation
Type of review
Dependent internal review
Reviewer name and institution
Data generator
Data set generator / modeller
Publication and ownership
UUID c83e44b0-4500-4fcf-b43f-3c819fdff72b
Date of last revision 2024-04-15T22:10:17.246461+08:00
Data set version 00.01.005
Permanent data set URI https://lcadata.tiangong.world/showProcess.xhtml?uuid=c83e44b0-4500-4fcf-b43f-3c819fdff72b&version=01.00.000&stock=TianGong
Owner of data set
Copyright No
License type Free of charge for all users and uses

Inputs

Outputs

Type of flow Classification Flow Location Mean amount Resulting amount Minimum amount Maximum amount
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisFilter separation/floating separation + A/O process，Its Technical efficiency of end-of-pipe management80，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = operating time of wastewater treatment facilities (hours) / normal production time (hours)
Product flow
Energy carriers and technologies / Crude oil based fuels 1000.0 kg1000.0 kg
General comment nan
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisBuffer tank + hydrocyclone + discharge，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = operating time of wastewater treatment facilities (hours) / normal production time (hours).The original article describes the pollution production coefficients as 11.12A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 11.12A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisFilter separation/floating separation + A2/O process，Its Technical efficiency of end-of-pipe management81.The original article describes the pollution production coefficients as 11.12A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 11.12A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisFilter separation/floating separation + bio-contact oxidation process，Its Technical efficiency of end-of-pipe management46，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 11.12A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 11.12A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisFilter separation/floating separation + chemical coagulation，Its Technical efficiency of end-of-pipe management78，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = operating time of wastewater treatment facilities (hours) / normal production time (hours).The original article describes the pollution production coefficients as 11.12A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 11.12A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisFilter separation/floating separation + SBR，Its Technical efficiency of end-of-pipe management92.The original article describes the pollution production coefficients as 11.12A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 11.12A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisHydrocyclone + degassing and oil removal tank + discharge.The original article describes the pollution production coefficients as 11.12A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 11.12A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisHydrocyclone + filter + discharge.The original article describes the pollution production coefficients as 11.12A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 11.12A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisInclined plate oil separator + traditional gas flotation machine + walnut shell filter + dual media filter + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = operating time of wastewater treatment facilities (hours) / normal production time (hours).The original article describes the pollution production coefficients as 11.12A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 11.12A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisPhysical + chemical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 11.12A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 11.12A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the Technical of end-of-pipe management technology for pollution Ammonia NitrogenisPhysical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 11.12A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 11.12A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisBuffer tank + hydrocyclone + discharge，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 647A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 647A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisFilter + dual media filter + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 647A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 647A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisFilter separation/floating separation + A/O process，Its Technical efficiency of end-of-pipe management82，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 647A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 647A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisFilter separation/floating separation + A2/O process，Its Technical efficiency of end-of-pipe management85，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 647A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 647A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisFilter separation/floating separation + bio-contact oxidation process，Its Technical efficiency of end-of-pipe management88.The original article describes the pollution production coefficients as 647A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 647A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisFilter separation/floating separation + chemical coagulation，Its Technical efficiency of end-of-pipe management73.The original article describes the pollution production coefficients as 647A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 647A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisFilter separation/floating separation + SBR，Its Technical efficiency of end-of-pipe management86，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 647A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 647A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisHydrocyclone + degassing and oil removal tank + discharge，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 647A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 647A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisHydrocyclone + filter + discharge.The original article describes the pollution production coefficients as 647A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 647A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisInclined plate oil separator + traditional gas flotation machine + walnut shell filter，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 647A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 647A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisPhysical + chemical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = operating time of wastewater treatment facilities (hours) / normal production time (hours).The original article describes the pollution production coefficients as 647A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 647A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution chemical oxygen demandisPhysical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = operating time of wastewater treatment facilities (hours) / normal production time (hours).The original article describes the pollution production coefficients as 647A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 647A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisBuffer tank + hydrocyclone + discharge.The original article describes the pollution production coefficients as 8.91A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 8.91A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisFilter separation/floating separation + A/O process，Its Technical efficiency of end-of-pipe management80，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 8.91A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 8.91A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisFilter separation/floating separation + A2/O process，Its Technical efficiency of end-of-pipe management80，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 8.91A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 8.91A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisFilter separation/floating separation + bio-contact oxidation process，Its Technical efficiency of end-of-pipe management72，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 8.91A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 8.91A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisFilter separation/floating separation + chemical coagulation，Its Technical efficiency of end-of-pipe management76.The original article describes the pollution production coefficients as 8.91A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 8.91A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisFilter separation/floating separation + SBR，Its Technical efficiency of end-of-pipe management91，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 8.91A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 8.91A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisHydrocyclone + degassing and oil removal tank + discharge，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = operating time of wastewater treatment facilities (hours) / normal production time (hours).The original article describes the pollution production coefficients as 8.91A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 8.91A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisHydrocyclone + filter + discharge，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 8.91A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 8.91A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisInclined plate oil separator + traditional gas flotation machine + walnut shell filter + dual media filter + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 8.91A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 8.91A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisPhysical + chemical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 8.91A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 8.91A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Nitrogen, organic boundisPhysical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 8.91A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 8.91A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisBuffer tank + hydrocyclone + discharge，Its Technical efficiency of end-of-pipe management41，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = operating time of wastewater treatment facilities (hours) / normal production time (hours).The original article describes the pollution production coefficients as 116.56A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 116.56A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisFilter separation/floating separation + A/O process，Its Technical efficiency of end-of-pipe management74，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 116.56A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 116.56A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisFilter separation/floating separation + A2/O process，Its Technical efficiency of end-of-pipe management74，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = operating time of wastewater treatment facilities (hours) / normal production time (hours).The original article describes the pollution production coefficients as 116.56A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 116.56A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisFilter separation/floating separation + bio-contact oxidation process，Its Technical efficiency of end-of-pipe management92，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 116.56A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 116.56A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisFilter separation/floating separation + chemical coagulation，Its Technical efficiency of end-of-pipe management74，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 116.56A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 116.56A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisFilter separation/floating separation + SBR，Its Technical efficiency of end-of-pipe management74.The original article describes the pollution production coefficients as 116.56A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 116.56A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisHydrocyclone + degassing and oil removal tank + discharge，Its Technical efficiency of end-of-pipe management41.The original article describes the pollution production coefficients as 116.56A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 116.56A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisHydrocyclone + filter + discharge，Its Technical efficiency of end-of-pipe management74.The original article describes the pollution production coefficients as 116.56A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 116.56A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisInclined plate oil separator + traditional gas flotation machine + walnut shell filter + dual media filter + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 116.56A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 116.56A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisPhysical + chemical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 116.56A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 116.56A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Product flow
Emissions / Other substance type 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution Petroleum-related wasteisPhysical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 116.56A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 116.56A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisBuffer tank + hydrocyclone + discharge，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.83A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.83A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisFilter separation/floating separation + A/O process，Its Technical efficiency of end-of-pipe management73，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.83A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.83A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisFilter separation/floating separation + A2/O process，Its Technical efficiency of end-of-pipe management73.The original article describes the pollution production coefficients as 0.83A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.83A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisFilter separation/floating separation + bio-contact oxidation process，Its Technical efficiency of end-of-pipe management73，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.83A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.83A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisFilter separation/floating separation + chemical coagulation，Its Technical efficiency of end-of-pipe management45，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = operating time of wastewater treatment facilities (hours) / normal production time (hours).The original article describes the pollution production coefficients as 0.83A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.83A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisHydrocyclone + degassing and oil removal tank + discharge，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.83A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.83A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisHydrocyclone + filter + discharge.The original article describes the pollution production coefficients as 0.83A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.83A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisInclined plate oil separator + traditional gas flotation machine + walnut shell filter + dual media filter + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.83A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.83A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisPhysical + chemical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.83A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.83A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
Elementary flow
Emissions / Emissions to water / Emissions to water, unspecified 0.0 kg0.0 kg
General comment the Technical of end-of-pipe management technology for pollution phenolisPhysical + reinjection，Its Technical efficiency of end-of-pipe management100，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as 0.83A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as 0.83A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.
0.0 0.0
General comment the treatment technology for the pollution of Waste waterdidn't offered，The formula for calculating the actual operation rate (k-value) of the end-of-pipe treatment facility is k = power consumption of treatment facilities (kWh/year) / (equipment rated power (kW) × equipment operating time (hours/year)).The original article describes the pollution production coefficients as A/(1-A)。Please revise the corresponding emissions after accounting for them according to the notes.。.The original article describes the pollution production coefficients as A/(1-A). Please revise the corresponding emissions after accounting for them according to the notes.