Key Data Set Information | |
Location | CN |
Name |
|
Use advice for data set | When using this data set, it is important to ensure it represents the specific aluminum frame removal process (manual or mechanical) in question. Users should account for the efficiency of the process and the quality of the recovered materials. For LCA studies, assumptions regarding downstream processing, reuse, or recycling rates of the recovered aluminum should be clearly stated and justified. Allocation procedures for environmental impacts between products in cases of co-processing need to be defined. |
Technical purpose of product or process | The aluminum frames and junction boxes disassembled in this process are intended for recycling or further processing in waste management facilities. This process is typically applied to end-of-life products, construction debris, or during the refurbishment activities where aluminum components are removed to be reclaimed. |
Classification |
Class name
:
Hierarchy level
|
General comment on data set | the Al frame and junction boxes are removed manually or mechanically in the dismantling stage. |
Copyright | No |
Owner of data set | |
Quantitative reference | |
Reference flow(s) |
|
Technological representativeness | |
Flow diagram(s) or picture(s) |
LCI method and allocation | |||||
Type of data set | Unit process, single operation | ||||
Deviation from LCI method principle / explanations | None | ||||
Deviation from modelling constants / explanations | None | ||||
Data sources, treatment and representativeness | |||||
Deviation from data cut-off and completeness principles / explanations | None | ||||
Deviation from data selection and combination principles / explanations | None | ||||
Deviation from data treatment and extrapolations principles / explanations | None | ||||
Data source(s) used for this data set | |||||
Completeness | |||||
Completeness of product model | No statement | ||||
Validation | |||||
|
Data generator | |
Data set generator / modeller | |
Data entry by | |
Time stamp (last saved) | 2023-12-18T13:42:17+08:00 |
Publication and ownership | |
UUID | 35f0c914-0b99-4e58-bed0-478f0bf32ed2 |
Date of last revision | 2024-04-20T14:57:18.182921+08:00 |
Data set version | 00.01.005 |
Permanent data set URI | https://lcadata.tiangong.world/showProcess.xhtml?uuid=35f0c914-0b99-4e58-bed0-478f0bf32ed2&version=01.00.000&stock=TianGong |
Owner of data set | |
Copyright | No |
License type | Free of charge for all users and uses |
Inputs
Type of flow | Classification | Flow | Location | Mean amount | Resulting amount | Minimum amount | Maximum amount |
---|---|---|---|---|---|---|---|
Product flow | End-of-life treatment / Material recycling | 1000.0 kg | 1000.0 kg | ||||
Product flow | Energy carriers and technologies / Electricity | 19.08 MJ | 19.08 MJ |
Outputs
Type of flow | Classification | Flow | Location | Mean amount | Resulting amount | Minimum amount | Maximum amount | ||
---|---|---|---|---|---|---|---|---|---|
Elementary flow | Resources / Resources from ground / Non-renewable element resources from ground | 179.0 kg | 179.0 kg | ||||||
Product flow | Materials production / Plastics | 14.4 kg | 14.4 kg | ||||||
Product flow | Materials production / Metals and semimetals | 9.767 kg | 9.767 kg | ||||||
Product flow | Emissions / Other substance type | 745.833 kg | 745.833 kg | ||||||
| |||||||||
Product flow | Energy carriers and technologies / Electricity | 64.24128 MJ | 64.24128 MJ | ||||||
Waste flow | Wastes / Post consumer waste | 51.0 kg | 51.0 kg | ||||||
Waste flow | Wastes / Production residues | 0.03029 kg | 0.03029 kg | ||||||
Elementary flow | Emissions / Emissions to air / Emissions to air, unspecified | 3.0E-5 kg | 3.0E-5 kg |