Close Go back Collapse all sections
Process Data set: Brick production ; Shale hollow brick production ; Drying process (en) en zh

Key Data Set Information
Location GZ-JX-CN
Reference year 2020
Name
Brick production ; Shale hollow brick production ; Drying process
Use advice for data set When using this data set for life cycle assessment, consider the specific production and discharge coefficients stated in the 'Manual of Coefficients of Production and Discharge for Industrial Pollution Sources of the First National Pollution Sources Census (Seventh Subbook)'. Ensure the data is applicable to the intended scope of use by confirming the technological relevance and that the annual production figure corresponds to the unit of bricks per tonne. Adjustments may be necessary for different brick sizes or production methods.
Technical purpose of product or process The shale hollow bricks produced in this process are commonly used in the construction industry for building walls, foundations, and other structural components due to their favorable properties such as low weight, good insulation, and structural strength.
Classification
Class name : Hierarchy level
  • ILCD: Unit processes / Materials production / Other mineralic materials
General comment on data set Traditional shale hollow brick production process
Copyright No
Owner of data set
Quantitative reference
Reference flow(s)
Technological representativeness
Flow diagram(s) or picture(s)
  • O32YbYmWyoofbtxD0DrckDlrnGg.png Image
LCI method and allocation
Type of data set Unit process, single operation
Deviation from LCI method principle / explanations None
Deviations from LCI method approaches / explanations The EIA report is based on the annual production of bricks (80 million bricks) as a whole, and for statistical purposes, the data has been converted according to the size specifications described therein, in terms of bricks produced per tonne of production
Deviation from modelling constants / explanations None
Data sources, treatment and representativeness
Deviation from data cut-off and completeness principles / explanations None
Data selection and combination principles Adopting the relevant data from the table of coefficients of production and discharge for sintered bricks and building blocks in 3131 of the Manual of Coefficients of Production and Discharge for Industrial Pollution Sources of the First National Pollution Sources Census (Seventh Subbook).
Deviation from data selection and combination principles / explanations None
Deviation from data treatment and extrapolations principles / explanations None
Data source(s) used for this data set
Sampling procedure The data for this EIA report is derived from real-time data from the plant
Completeness
Completeness of product model No statement
Validation
Type of review
Dependent internal review
Reviewer name and institution
Data generator
Data set generator / modeller
Data entry by
Time stamp (last saved) 2024-04-13T15:29:49+08:00
Publication and ownership
UUID 90b71678-076a-481f-82b1-507d286a9348
Date of last revision 2024-04-20T14:51:50.229664+08:00
Data set version 00.01.005
Permanent data set URI https://lcadata.tiangong.world/showProcess.xhtml?uuid=90b71678-076a-481f-82b1-507d286a9348&version=01.00.000&stock=TianGong
Owner of data set
Copyright No
License type Free of charge for all users and uses

Inputs

Type of flow Classification Flow Location Mean amount Resulting amount Minimum amount Maximum amount
Product flow Materials production / Other materials 1510.0 kg1510.0 kg
Product flow Energy carriers and technologies / Electricity 3.7331999999999996 MJ3.7331999999999996 MJ

Outputs

Type of flow Classification Flow Location Mean amount Resulting amount Minimum amount Maximum amount
Product flow
Materials production / Other materials 1450.0 kg1450.0 kg
General comment Thin billet