eec9d493-eb3a-47be-909a-6e7b8734aa46 Nose-cone manufacture ; Nose-cone of a 1.5 MW wind turbine鼻锥的制造 ; 1.5 MW 风轮机的鼻锥Unit processesMaterials productionOther materialsThe nose-cone manufactured in this process is designed specifically for use in 1.5 MW wind turbines. This component contributes to the aerodynamic performance and protection of the turbine's internal components. These wind turbines are typically deployed in large-scale wind farms for the generation of renewable energy, as exemplified by the wind farm consisting of 33 domestic 1.5 MW wind turbines located in the northeast of Inner Mongolia.本工艺制造的鼻锥专为1.5兆瓦风力涡轮设计。该部件有助于提高涡轮的空气动力学性能，并保护内部组件。这些风力涡轮通常用于大型风力发电场以产生可再生能源，例如位于内蒙古东北部的、由33台国产1.5兆瓦风力涡轮组成的风力发电场。The functional unit is 1.5 MW wind turbine1The data regarding the parameters of wind power has been collected from Wang (2012). A wind farm equipped with 33 domestic 1.5 megawatts (MW) wind turbines is regarded as a case study to analyze the environmental impact and its substitution effects. The wind farm is located in the northeast of Inner Mongolia, the province in which most of China’s wind power is installed (Xia and Song, 2017).风电功率参数的数据来自Wang ( 2012 )。以装有33台国产1.5兆瓦( MW )风电机组的风电场为案例，分析其环境影响及其替代效应。该风电场位于我国风电装机最多的省份- -内蒙古东北部。The nose-cone manufactured in this process is designed specifically for use in 1.5 MW wind turbines. This component contributes to the aerodynamic performance and protection of the turbine's internal components. These wind turbines are typically deployed in large-scale wind farms for the generation of renewable energy, as exemplified by the wind farm consisting of 33 domestic 1.5 MW wind turbines located in the northeast of Inner Mongolia.本工艺制造的鼻锥专为1.5兆瓦风力涡轮设计。该部件有助于提高涡轮的空气动力学性能，并保护内部组件。这些风力涡轮通常用于大型风力发电场以产生可再生能源，例如位于内蒙古东北部的、由33台国产1.5兆瓦风力涡轮组成的风力发电场。Unit process, single operationAttributionalNone无AllocationThe life cycle inventory for wind power is illustrated as follows. The production and manufacturing stage include the production of wind turbines, substations, and cables, which consume a large amount of energy and emit pollutants (Xue et al., 2015). 风电的生命周期清单如下所示。生产制造阶段包括风电机组、变电站、电缆的生产，这些设备消耗大量能源，排放污染物( Xue et al . , 2015)。None无None无The data regarding the parameters of wind power has been collected from Wang (2012). A wind farm equipped with 33 domestic 1.5 megawatts (MW) wind turbines is regarded as a case study to analyze the environmental impact and its substitution effects. The wind farm is located in the northeast of Inner Mongolia, the province in which most of China’s wind power is installed (Xia and Song, 2017).风电功率参数的数据来自Wang ( 2012 )。以装有33台国产1.5兆瓦( MW )风电机组的风电场为案例，分析其环境影响及其替代效应。该风电场位于我国风电装机最多的省份- -内蒙古东北部。None无None无Li, H., Jiang, H.-D., Dong, K.-Y., Wei, Y.-M. & Liao, H. A comparative analysis of the life cycle environmental emissions from wind and coal power: Evidence from China. Journal of Cleaner Production 248, 119192 (2020).Li, H., Jiang, H.-D., Dong, K.-Y., Wei, Y.-M. & Liao, H. A comparative analysis of the life cycle environmental emissions from wind and coal power: Evidence from China. Journal of Cleaner Production 248, 119192 (2020).When using the LCA data set for the manufacturing process of the nose-cone for a 1.5 MW wind turbine, it is crucial to ensure that all assumptions and parameters from the underlying studies are consistent with the scope of your assessment. Be aware that the environmental impacts are specific to the production conditions in Inner Mongolia and that they take into account regional energy mixes and technological practices. If applying the data in a different context, adjustments may be required to reflect local conditions. Attention should be given to changes over time in technological practices and emission factors which may affect the relevance of the data set.在使用1.5兆瓦风力涡轮鼻锥制造过程的LCA数据集时，确保所有来自基础研究的假设和参数与评估范围一致至关重要。请注意，环境影响特定于内蒙古的生产条件，并且考虑到了区域能源组合和技术实践。如果在不同的环境中应用数据，可能需要调整以反映当地条件。应关注技术实践和排放因子随时间变化，这可能影响数据集的相关性。Inventory: The internal review was done by several iteration steps concerning raw data validation, raw data documentation, representativity, completeness and consistency of modelling with regard to ISO 14040 and 14044.清单： 内部审查通过几个迭代步骤完成，涉及原始数据验证、原始数据记录、代表性、完整性、与 ISO 14040 和 14044 有关的建模的一致性。Tiangong LCI Data Working Group天工LCI数据工作小组Yunzhi Zhao, ll10088@163.com赵云志, ll10088@163.comll10088@163.comll10088@163.com2023-12-18T13:03:29+08:002024-04-20T14:59:50.718451+08:0000.01.005https://lcadata.tiangong.world/showProcess.xhtml?uuid=eec9d493-eb3a-47be-909a-6e7b8734aa46&version=01.00.000&stock=TianGongTiangong LCI Data Working Group天工LCI数据工作小组falseFree of charge for all users and usesironInput3000.03000.0CalculatedSteel and ironSteel and ironNacelle nose-cone of wind turbineOutput1.01.0Estimated